Publicité
AUX IN CONNECTION
1. Set the FUNCTION switch to AUX position.
2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your audio device and the other side to the aux-in jack on the unit.
3. Turn on your audio device and follow the playback instruction.
4. To stop this function, set the FUNCTION switch to OFF position..
Important Note
Automatic standby switching
To comply with the ERP2 directive, when the unit receives no signal after approximate 10 minutes,
the unit will automatically switch to STANDBY mode. To switch the unit on again, set the
FUNCTION switch to OFF position then switch to the desired function position..
Specifications
DAB+/DAB 174 – 240 MHz
Frequency Range:
FM 87.5 - 108 MHz
Power Supply:
AC 230V ~ 50Hz
DC 12V
Specifications are subject to change without further notice.
All manuals and user guides at all-guides.com
(UM-2 x 8)
Publicité
