Publicité
FM Station Information
Press INFO button to display the information of the current FM station in the sequence below :
Signal Strength This shows a slide bar to indicate the signal strength, the stronger the signal,
the longer the bar will be from left to right.
Date and Time This displays the current date and time.
Frequency This displays the frequency of the current station.
Audio Type This displays if the audio being received is in mono or stereo mode.
Scrolling Text This is a scrolling message giving real-time information, e.g. song titles, news
headlines,etc.
Programme Type This describes the "style" or "genre" of the programme that is being
broadcast.
CD/MP3 Disc OPERATION
1. Set the FUNCTION switch to CD/USB position.
2. Insert a CD/MP3 disc in the CD compartment and close the CD door, the unit will start reading
the disc.
3. Press the PLAY/PAUSE button to start playing the disc.
4. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume, press
the PLAY/PAUSE button again.
5. If your MP3 disc has folders, you can use the FOLDER UP/FODER DOWN button to select
the desired folder.
USB OPERATION
1. Set the FUNCTION switch to CD/USB position.
2. Hold the USB button for 2 seconds to enter USB Mode.
3. Plug your USB device into the USB port on the unit, the unit will start reading the files in the
USB device.
4. Press the PLAY/PAUSE button to start playing the disc.
5. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume, press
the PLAY/PAUSE button again.
6. If your USB has folders, you can use the FOLDER UP/FODER DOWN button to select the
desired folder.
All manuals and user guides at all-guides.com
Programming
The programming should be done during STOP mode
1. Press the PROG button, the display will show 'PROG01' .
2. Use the SKIP> or SKIP< button to select the desired track.
3. Press the PROG button again to store the selected track in the memory, the LCD display will
show 'PROG02' and flash continuously.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory for CD disc. You can store up to 99 tracks in the memory for MP3 files.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP button.
7. To cancel the programming list, press the STOP button and open the CD compartment door or
set the FUNCTION switch to other position.
Repeat Play Mode
Press the MODE button to select repeat play mode with the following sequence.
REP1 REPA RAND Normal
REP1 – repeat the track being played.
REPA – repeat ALL the tracks in the storage media.
RAND – play the tracks in random order selected by the player..
Normal – play the tracks in sequence.
Skip Mode
1. During play mode, press the SKIP+/TUNE> button to go to the next track.
2. During play mode, press the SKIP-/TUNE< button to go back to the previous track.
3. During Play mode, press the 10+ button to skip 10 tracks.
Turn Off CD/USB Operation
To turn off the CD/USB operation, set the FUNCTION switch to other position.
System Reset
There may be times when you need to reset your unit back to the factory settings especially when
you have moved house. If you experience reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national DAB stations in that
area, your previously tuned channels may no longer be available.
1. In DAB mode, press and hold MODE button until the display shows "Press ENTER key to
Reset".
2. Press the ENTER button to start reset. The display will show "OK", then it will automatically
enter DAB mode and perform auto scan.
Note : After the system reset, all the previous stored DAB+ or FM stations will be erased from the
memory.
Publicité
