NovoPress HPA400 Manuel D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
HPA400
Please read this Operating Manual carefully.
The safety instructions it contains must be observed.
EN
Compliance with local safety regulations is essential.
Pos : 11 /System/Sicherheit/Grundlegende Sic her hei tshi nweise/02 - Bruc hstüc ke - unsachg emäß er U mgang - Info @ 2\mod_1450795901748_18.doc x @ 16595 @ @ 1
Pos : 12 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
WARNING
Read all safety information and instructions!
Failure to comply with the safety information and instructions may result in electric
shock, fire and/or serious injuries.
Therefore:
Keep all safety information and instructions for future use.
WARNING
Risk of injury from ejected fragments
Incorrect or improper use or the use of worn or damaged inserts and press cylinders
carries a risk of injury from ejected fragments.
Therefore:
Press cylinders may only be used by trained personnel.
Compliance with the specified service work and service intervals is mandatory.
Check the press cylinders and inserts for cracks and other signs of wear before
each use.
Discard all press cylinders and inserts with material cracks or other signs of wear
immediately and do not use them any longer.
Only use press cylinders and inserts that are in perfect technical condition.
After incorrect use, do not use the press cylinders and inserts any longer and have
them inspected by an authorised workshop.
CAUTION
Unskilled use may lead to a damaged or malfunctioning press cylinder
and insert.
Therefore:
Replace worn inserts immediately and do not use them any longer.
Use carrying cases for transport and storage and keep press tools and the press
cylinders and inserts in a dry room.
Have damage checked immediately by an authorised workshop.
Comply with the safety instructions regarding the cleaning and anti-corrosion
agents used.
Information
Consult the documents provided by the system supplier for handling and assembly
instructions for cable lugs and press fittings.
14

Publicité

Table des Matières
loading

Table des Matières