Télécharger Imprimer la page

Milwaukee ASE 1400 Instructions D'utilisation page 10

Publicité

TECHNICAL DATA
Power (motor) ...............................................................................
Rate of air flow .............................................................................
Vacuum .........................................................................................
Capacity
Container ...................................................................................
Solid ...........................................................................................
Liquid .........................................................................................
Filter surface .................................................................................
Maximum power off-take ..............................................................
Suction hose diameter ..................................................................
Typically the A-weighted sound pressure level of the tool is less
than 70 dB (A).
The noise level when working can exceed 85 dB (A).
Wear ear protectors!
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions, including those given in the accompanying
brochure. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Appliances used at many different locations including open
air must be connected via a current surge preventing switch.
Before doing any work on the machine, pull the plug out of
the socket.
Make sure the machine is switched off before plugging in.
Never suck up into the machine any inflammable or
explosive solvents, or liquids like petrol, oil, alcohol,
thinners, or small particles (such as metal filings or ash) that
may be hotter than 60°C - otherwise there is danger of
explosion or fire!
You are not allowed to use the appliance in the vicinity of
inflammable gases or substances.
Do not put appliances or accessories into operation, if: the
appliance has recognizable damage (cracks/breaks), the
mains connection lead is defective or shows signs of
cracking or aging, there is a suspected non-visible defect
(after having been dropped).
Do not point the nozzle, hose or tube at people or animals.
The plug socket on the appliance may be used only for the
purposes defined in the usage instructions.
If any foam or water egresses, switch off immediately.
Empty the container and, if need be, the pleated filter.
Acids, acetone and solvents can corrode the appliance
components.
In the event of misuse, improper operation or unprofessional
repair work no liability shall be assumed by us for any
damage incurred.
Do not use suction on health damaging dusts.
Not suitable for sweeping up liquids which form a large
foam.
Make sure that the mains connection cable is not damaged,
squashed, bent, or damaged by being run over or in any
other way.
If the mains connection cable is damaged the machine must
not be used.
Extension cables to the mains must at least be protected
from water spray and contain an earth lead.
The machine is to be connected to the mains via an H 16A
contact-breaker or a 16A fuse.
This tool is not intended for use by persons (including
children) with limited physical, sensory or mental capacities
or insufficient experience and/or knowledge unless they are
supervised by a person who is responsible for their safety or
have been instructed by them in the safe use of the tool.
Children should be supervised in order to ensure that they
do not play with the tool.
20
ENGLISH
..1200 W max 1400 W
......61 l/s
....248 mbar
......50 l
......44 l
......40 l
..8600 cm
2
..2000 W
......35 mm
SPECIFIED CONDITIONS OF USE
The vacuum cleaner can be used as follows: suction of non-
toxic dusts and non-cumbustible liquids, aspiration of sloppy
or muddy water, clearing up clogged drains, on-site cleaning
(building sites, working places, etc.).
Do not use this product in any other way as stated for
normal use.
CONNECTION WALL CHASER
Connect wall chaser with antistatic hose (available as
accessory) to avoid building up of charge.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents: EN 50366, EN 60 335, EN 55014-1, EN 55014-
2, EN 61000-3-2, EN 61000-3-3, in accordance with the
regulations 2006/95/EC, 2004/108/EC
Volker Siegle
Winnenden, 2007-10-19
Manager Product Development
MAINS CONNECTION
Connect only to a single-phase AC current supply and only
to the mains voltage specified on the rating plate. Must only
be used from sockets with earth wire
MAINTENANCE
Should the suction performance decrease in spite of
automatic filter cleaning, the filter cartridges must be either
cleaned or replaced (see section exchange of filter
cartridges in illustration).
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Milwaukee Electric Tool,
Max-Eyth-Straße 10, D-71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully
before starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the
machine.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together
with household waste material! In
observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling
facility.
ENGLISH
21

Publicité

loading