Hach 2100Q Manuel D'utilisation De Base page 16

Error/Warning Description
Please disconnect the Data storage does not
USB cable from your respond while connected
computer. to the meter and the
computer.
USB module memory Data storage is full.
full. Delete data and try
again.
Delete Last Reading Error in the data storage.
Failed!
Delete Data Log failed!
Can't read data set!
Can't store data!
Can't store to the
Reading Log!
Can't store to the Verify
Cal Log!
Error storing data!
Error reading data!
16 English
Solution
Disconnect the USB
cable from the meter and
try sending data again.
1. Connect USB/power
module to the computer.
2. Download the stored
data to the computer.
3. Delete Data Log on
the module.
Turn the meter off and
on. If the error message
still occurs, contact
technical support.