Publicité
When
dispensing
surfaces may feel slightly damper because
Polti Frescovapor mixes with the steam
being dispensed. To stop dispensing Polti
Frescovapor, move the selector located on
the brush to the OFF position.
The selector only controls dispensing of the
deodorant that mixes with the steam. To
adjust the amount of steam, use the central
steam regulation button - STEAM SET (7).
Contains
one
Frescovapor
1
2
For more information on Polti Frescovapor
visit www.polti.com.
WARNING: Before using Polti FrescoVapor
on upholstery, leather, special fabrics and
wood surfaces, consult the manufacturer's
instructions and always carry out a test on
a hidden area or sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
15. EXTRA STEAM FUNCTION
Use only the Portable Steam Cleaner.
The Extra steam function can be activated
for quicker and easier cleaning. To activate,
press the steam trigger for 3 seconds. You
will produce more steam for 5 seconds. This
function can be reactivated approximately
one minute after the previous activation.
16. AUTOMATIC SHUT-DOWN
FUNCTION
After 10 minutes of inactivity (calculated from
the last operation carried out on the appliance
in both modes: Steam Mop and Portable
Steam Cleaner) the appliance will shut off
automatically and the OFF light will flash. To
reactivate the appliance, press the Steam Set
button.
17. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, steam will stop being released. To restart
operations just fill the water tank again as
described in section 1.
WARNING: This operation must always
be done after having disconnected the
appliance from the mains.
the
deodoriser,
200-ml
bottle
.
18. REPLACEMENT OF THE
the
LIMESCALE FILTER
Polti Vaporetto STYLE has a filter containing
special resins capable of stopping limescale
and extending the life of your product.
We recommend that the filter be changed
3 times per year.
18.1 Unplug from the mains electricity.
18.2 Remove
appliance by pressing the upper button and
of
Polti
pulling it upwards (1-2).
18.3 Gently lift the hook tab and remove the
old filter (19).
18.4 Position the new filter, push gently and
make sure that it is perfectly inserted, then
reposition the water tank.
For more information on limescale filters visit
www.polti.com.
The first time it is used or when replacing
the limescale filter, it will be necessary to
activate steam delivery and wait until the
limescale filter fills with water and the
product produces steam again.
19. GENERAL MAINTENANCE
Ensure that the appliance is switched off and
disconnected from the mains.
To clean the outside of the appliance, only use
a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry before
the next use. After using the brushes, let the
bristles cool down in their natural position, in
order to avoid any deformation.
Do not use detergents of any kind.
The cloths provided can be washed by
following the instructions included on the
label.
20. STORAGE
20.1 Turn off the appliance and unplug it from
the mains electricity.
20.2 Completely empty the water tank to
avoid water leaks.
20.3 Before detaching the cloth from the
brush, wait a few minutes to allow it to cool.
20.4 Polti Vaporetto STYLE can also be
stored by inserting the tube with the parking
clip into the portable unit. This way, the mop
will take up less space.
| 21 |
the
water
tank
from
the
Publicité
