Publicité
The four LEDs on the control panel will light
up alternately (7). Wait until the "steam ready"
indicator light comes on
steady light). At this point, the appliance is
ready.
Before starting to steam clean, it is good
practice to have previously swept or vacuumed
the floor or the surface to be cleaned.
WARNING: When the tube with handle
is taken out, the appliance automatically
switches OFF.
3.
CONNECTION OF
ACCESSORIES
The accessories can be connected directly to
the Portable Steam Cleaner or to the flexible
hose for greater freedom of movement.
3.1
FLEXIBLE HOSE
Connect the hose connector to the portable
cleaner until you hear a "click". Check that it is
firmly attached (8).
To remove the flexible hose, press the unlock
button and pull outwards (8).
3.2 To connect the accessories directly to
the Portable Steam Cleaner or to the flexible
hose, just insert them on the point and turn
them until they lock (9).
4. STEAM ADJUSTMENT
There are 3 pre-set steam flow programs
available. Simply press the central Steam
Set button on the control panel (7) until the
corresponding indicator light for the desired
program lights up.
• MIN (lowest level): to clean parquet and
laminate, delicate fabrics, upholstery, sofas
and mattresses, etc. and to steam plants.
• MED (medium level): to clean windows and
ceramic or porcelain tile floors, and to clean
and refresh rugs and carpets;
• MAX (highest level): to remove build-up,
stains, grease and to clean marble floors;
5.
WARNING: Before steam treating surfaces
(around 20 sec.,
(wood or laminate floors, carpets, rugs,
leather
especially
treated), consult the surface manufacturer's
or the supplier/installer's instructions and
always perform a test on a section that
is out of view or on a sample. Allow the
steamed surface to dry to ensure that there
is no deterioration, change of colour or
deformation and that the surface stands up
to the temperature of the steam.
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Before starting to steam clean, it is good
practice
vacuumed the floor.
Ensure that the points in Sections 1 and 2 have
been followed.
5.1
brush. To make it easier to attach, the cloth
has an easy lock/release system to avoid
having to bend over and use your hands. Just
place the cleaning side of the cloth on the
floor and rest the brush on top (10).
5.2 Unlock the appliance brush by tilting it
backward and using your foot.
5.3 Select the program type (7). For this
type of surface, we recommend medium
(MED). The appliance will start dispensing
steam (the tank will light up to indicate that
the appliance is dispensing steam). It is then
possible to start cleaning by moving the mop
back and forth. To stop dispensing steam,
press the central Steam Set button several
times on the control panel (7) until the light
turns on
2 seconds.
5.4 The brush has a flexible joint that makes
it easy to clean corners and edges of furniture
and walls.
During cleaning, it is possible to insert the
power cable into the upper hook to avoid it
getting in the way (11).
The brush has bristles built into the rear side
(12) ideal for removing the most stubborn
dirt. To use, return the handle to the vertical
position locking the brush, then tilt until the
brushes are touching the floor and scrape off
the dirt.
5.5 When you have finished cleaning, turn
off the appliance and remove the cloth.
| 17 |
CLEANING FLOORS
and
fabrics
and
those
that
to
have
previously
Attach the supplied cloth to the floor
or hold it down for more than
any
surfaces
are
delicate
or
swept
or
Publicité
