Publicité
Fig. E
Electrical connections for 12V battery
WARNING: Be sure that the motor is switched to the "OFF" position before connection to the
battery otherwise it will not start.
Connect the red battery cable to the positive battery terminal (+). Connect the black battery cable to the
negative battery terminal (-).
On/Off Speed Control
Speeds can be selected by turning the handle clockwise for forward (F) speeds or anti-clockwise for
reverse (R) speeds. To disengage, simply centre the handle between forward and reverse speeds (O).
The handle is telescopic and extends up to 14cm (Fig. I).
Fig. I
Maintenance
• Clean behind propeller after every use. Check for fishing line, weeds or other debris. Any debris
wrapped around the prop will cause a loss in power. Lubricate the mount and column every
2 weeks, apply a few drops of light machine oil at pivotal points.
• Clean electrical connections every month, inspect for loose or corroded terminals and frayed wires.
• Clean terminals with a wire brush and replace any frayed wires.
• Lack of maintenance may cause excessive heat and loss of power.
• Check all nuts, bolts and screws regularly, and physically check all hardware for tightness and security.
• Be sure to choose a well ventilated and dry location when storing the motor for long periods.
• Never leave the motor outside, as this may cause damaged to the magnet of the driving unit.
Fig. F
Fig. G
Fig. H
5
Publicité
