Hitachi PC-ARFP1E Manuel D'utilisation page 78

OTHER INDICATIONS
1 0 .1 .2 Ce nt ra l c ont rol
When remote control operation is restricted (all functions), the
central control " " will turn ON.
If the remote control restriction is set from the central controller,
the settings for "RUN", "Operation Mode", "Temperature Setting",
"Fan Speed", and "Louver" will not be accessible from the
controller.
Meeting Room
A/C
MODE SPEED LOUV.
COOL
Central Control
The icon " " will be displayed only when the cursor is placed on
a restricted setting, which cannot be set.
1 0 .1 .3 M ot ion se nsor c ont rol
"Motion sensor ON" is turned ON during the motion sensor
control. In this case, the operation is performed with saving the
capacity or stopped by the motion sensor control.
Meeting Room
A/C
MODE SPEED LOUV.
COOL
Motion Sensor ON
SPEED Adj.
1 0 .1 .4 Priorit ie s
When only the Operation Mode or Operation Mode and
Temperature Setting have setting priorities (only when using the
main controller), the icon "Priority" is displayed.
In this instance, the sub controller "Restrict" icon is displayed
and the setting modifications of the Operation Mode and
Temperature Setting from the sub controller will be restricted.
• Main Controller:
Meeting Room
A/C
MODE SPEED LOUV.
COOL
MAIN
SPEED
70 PMML0496 rev.1 - 12/2020
TEMP
TEMP
TEMP
Adj.
Priority
•
Sub Controller:
A/C Meeting Room
MODE SPEED LOUV.
COOL
SUB
SPEED
10.1.5 External pow er saving control processing
The icon "Ext. Sav" is displayed while outdoor capacity control
set from the central controller or the outdoor unit is enabled.
However, if the controller is set for indoor unit rotation or
intermittent operation control, the icon will not display as ON.
A/C Meeting Room
MODE SPEED LOUV.
COOL
Ext.Sav
SPEED
1 0 .1 .6 T he rm o-c ont rolle r
The fan speed is changed to "LOW" at the thermo-controller
actuation. However, the indication is not changed. (Only in the
heating operation mode).
1 0 .1 .7 De frost
• Defrost Operation
The icon "Defrost" is displayed and the indoor fan will turn
OFF.
The indoor fan is stopped though the indication is not
changed. The louver is fixed at the horizontal position.
However, the louver indication of LCD continues to activate.
A/C Meeting Room
MODE SPEED LOUV.
COOL
Defrost
SPEED
• Operation Stoppage during Defrosting Operation
The RUN indicator (Green) is turned OFF when the
operation is stopped during the defrosting.
However, the operation continues with "Defrost" indication,
and the unit is stopped after the defrost operation is finished.
TEMP
Adj.
Restrict
Priority
TEMP
Adj.
TEMP
Adj.