Hitachi PC-ARFP1E Manuel D'utilisation page 42

TEST RUN MENU
6.14 COMPRESSOR PREHEATING CANCELLATION
This function cancels the compressor preheating control.
1 Press and hold " " (menu) and "
simultaneously for at least 3 seconds during the normal
mode (when unit is not operated). The test run menu will be
displayed.
Test Run Menu
Priority Setting
Power Up Setting
Setback Trigger Unit
Cancel Preheating Control
Contact Information
Sel.
2 Select "Cancel Preheating Control" from the test run menu
" and "OK".
pressing "
6.15 CONTACT INFORMATION REGISTRATION
Contact information can be registered from "Contact
Information".
1 Press and hold " " (menu) and "
simultaneously for at least 3 seconds during the normal
mode (when unit is not operated). The test run menu will be
displayed.
2 Select "Contact Information" from the test run menu and
press "OK". The contact information 1 will be displayed.
Contact Information 1
ABC ' +
abc 1 2
Sym.1 q w
Sym.2 € a
< >
SPAC DEL
Sel. Letter
3 Press " " (ECO) to change font type.
4 Press " " to select letter.
5 Press "OK" to confirm the letter. (Max.: 28 letters)
6 Select "End" and press "OK" (or simply press " " (menu)),
(7) will be displayed.
34
PMML0496 rev.1 - 12/2020
" (return / help)
/ ?
03
/
03
OK
Entr Rtrn
ADJ
/ " (return / help)
?
* ; . ? - / : =
3 4 5 6 7 8 9 0
e r t y u i o p
s d f g h j k l
z x c v b n m ,
End
← →
OK Entr End
3 The confirmation screen will be displayed.
Cancel Compressor Preheating Control
Cancel preheating control
for compressor?
Yes
Sel.
4 Select "Yes" and press "OK". The test run menu will be
displayed after the setting is confirmed. If "No" is pressed,
the screen will return to test run menu.
5 Press " / " (return / help) on the test run menu to return to
?
the normal mode.
7 Repeat (2)~(6) to register contact information 2.
Select "End" and press "OK", the confirmation screen will
be displayed. (Also, press " " (menu) and the confirmation
screen will be displayed).
Contact Information
Electric Corp.
Register these contets?
Yes
Sel.
8 Select "Yes" and press "OK". The test run menu will be
displayed after the setting is confirmed. If "No" is pressed,
the screen will return to (2).
No
OK Entr Rtrn
No
OK Entr Rtrn