Publicité
away from hot surfaces.
- Do not operate the appliance if its cable, plug, or body show
visible damage, do not operate properly, or have been
dropped.
- Do not use the appliance in confined spaces with explosive
or flammable vapours.
- Do not leave the appliance unattended while in use.
- Unplug it from the power supply when you finish using it and
before leaving the room.
- Avoid spillage on the conductor cable.
- The surface of the heating element is subject to residual
heat after use.
- In case of misuse, personal injury and/or material damage
may occur.
- Do not try to repair the appliance by yourself. Contact the
official Cecotec Technical Support Service.
- Always turn off and unplug the appliance when not in use,
before moving it to a new location, and before assembling or
disassembling it. To avoid tripping hazards, wind the cable
safely.
- To ensure the correct operation of the appliance, cleaning
and maintenance tasks must be carried out according to
this instruction manual. Always turn off and unplug the
appliance before cleaning.
- Boiling water may overflow from the kettle.
- Use the appliance only for its intended purpose.
- Fill up the kettle with cold water only.
- The water level must be between the MAX. and MIN. marks.
- Always ensure that the cover is tightly closed.
- The kettle body must fit correctly with the kettle base.
- Remove and refit the cover carefully when hot.
- Take extreme precaution when moving the kettle containing
THERMOSENSE 200 WOODY
9
Publicité
