Publicité
ENGLISH
Cleaning the filter
If necessary, clean the anti-scale filter (Fig. 2) with a soft, damp brush.
Descaling
-
Depending on the quality of the water in your area, limescale deposits may form inside the
appliance, so it is advisable to remove them regularly.
-
Any warranty claims will be void if the appliance malfunctions due to insufficient descaling.
To perform a correct descaling, follow the steps below:
1. A mixture of 0.5 litres of water and 40 ml of vinegar is suitable for descaling.
2. Pour in the descaling solution.
3. Switch on the appliance until the solution reaches boiling temperature.
4. Leave it on for a short period of time.
5. To clean the main body after descaling, rinse it thoroughly with clean water.
NOTE:
-
During descaling, make sure that there is sufficient ventilation and do not inhale vinegar
fumes.
-
Do not pour descaling products into enamelled sinks.
Storage
-
Make sure the appliance is completely cool and dry before storing.
-
Wrap the power cable around the base for storage.
-
Store the kettle in a cool, dry place.
5. TROUBLESHOOTING
Problem
The kettle does not switch on
The kettle does not boil water
The kettle does not switch off
automatically
44
THERMOSENSE 200 WOODY
Solutions
Check that it is correctly connected to the mains.
Make sure that the plug works.
Make sure the lever was pressed down.
Make sure that the water is between the minimum and
maximum level.
Check that it is correctly connected to the mains.
Check that the cover is correctly fitted.
Publicité
