Fulgor Milano F7IRC36O1 Mode D'emploi page 13

Each time the appliance is switched on it
goes through a self-diagnosis procedure
lasting up to three minutes before
completely starting up.
4.2 How to adjust the temperature for
different requirements.
Each model has been carefully tested before leaving
the factory and is adjusted in such a way to ensure
high performance and efficient operation.
Usually, it is not necessary on modify the settings.
How it looks on the home screen:
Fridge
+
Compartment
Modify the temperatures compartment
How to modify the Fridge compartment
temperature.
FUNCTIONS
5
+
°C
SETTINGS
+ 0
OFF
+ 1
+ 2
°C
+ 3
OK
+ 4
5
Preset
°C
temperature
1) Home screen.
Touch the icon of
fridge compartement.
2) Scoll up/down to
select the desired
temperature of the
fridge
from +33°F to +44°F
(from +1°C to +7°C)
+ 0
OFF
+ 1
+ 2
°C
+ 3
OK
+ 4
The temperature shown can vary slightly
in respect to the set temperature following
frequent openings of the doors or insertion
of room temperature foods or large
quantities of foods.
6 to 12 hours are necessary to reach the
selected temperature in some cases.
Padlock icon.
The padlock icon shows up when the
temperatures are set up.
The padlock open/close shows that the
compartment's temperatures can or can not be
modified by the user.
Usually a grey padlock will show, in that case you
can scroll up or down with a finger on the display,
select the desired temperature and press OK to
confirm.
OFF
Whereas a white closed padlock will be seen if
the user has activated a function that overrides
the settings of the refrigerator and prevents
the user from changing the temperature
of the compartment
function has completed or been canceled.
3) Touch the icon
ok to confirm
the desidered
temperature.
+ 0
+ 1
+ 2
°C
+ 3
OK
+ 4
until the overriding
EN
13