Publicité
8. CLOCK FUNCTIONS
8.1 Clock functions table
Time of Day
To set, change or check the time of day.
Duration
To set how long the appliance works.
Minute Minder
To set a countdown. This function has no ef‐
fect on the operation of the appliance. You
can set this function at any time, also when
the appliance is off.
8.2 Setting: Time of Day
1.
- press repeatedly to change the time
of day.
- flashes.
2.
,
- press to set the time.
After approximately 5 sec, the flashing stops
and the display shows the time.
- flashes when you connect the appliance
to the electrical supply, when there was a
power cut or when the timer is not set.
- press to set the time.
8.3 Setting: Duration
1. Set a heating function and the
temperature.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Inserting accessories
A small indentation at the top increases
safety and provides tilt protection. The
indentations are also anti-tip devices. The rim
around the shelf prevents cookware from
slipping off the shelf.
26
ENGLISH
2.
- press repeatedly.
3.
,
- press to set the: Duration.
The display shows
the set time ends. The signal sounds and the
appliance turns off.
4. Press any button to stop the signal.
5. Turn the knobs to the off position.
8.4 Setting: Minute Minder
1.
- press repeatedly.
2.
,
- press to set the time.
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
3. Press any button to stop the signal.
4. Turn the knobs to the off position.
8.5 Cancelling: Clock functions
1.
- press repeatedly until the clock
function symbol starts to flash.
2. Press and hold
,
The clock function turns off after few
seconds.
Wire shelf
Insert the shelf between the guide bars of the
shelf support and make sure that the feet
- flashes.
.
- flashes when
- flashes.
.
Publicité
