Publicité
2.3 Product components
Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Sampler components
1 Lifting module
2 Tray screw cap
3 Tube holder
4 Rotating module
5 Power cord
6 Power supply
7 Base with magnetic stirrer
8 Ethernet cables
Note: The type of tray, probe holder and beakers is dependent on the model.
2.4 Instrument connections
Connect the power supply, the rotating module, the magnetic stirrer and the PC to the rear panel of
the instrument. Refer to
8 English
Figure 3
for instrument connections.
Figure
2. If any items are missing or
9 RS-232 adapter cable with USB/Serial adapter
10 TM1000 software
11 Tray
12 Sample beakers
13 Magnetic stir bars
14 Probe holder
15 Ring adapters for 50 mL beaker
Publicité
