Publicité
the risk of starting the tool accidentally.
Inserting and Removing
the Battery Pack
mended in the battery/charger list, included
with your tool. Use of any other types of bat-
teries may result in personal injury or property
damage.
serting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
To Insert the Battery Pack
(Fig. 3)
1. Set Trigger Lock 3 to the locked position.
2. Slide charged Battery Pack 6 into the
housing until the battery pack locks into
position.
Your tool is equipped with a secondary lock-
ing latch to prevent the battery pack from
completely falling out of the handle, should
it become loose due to vibration.
To Remove the Battery Pack
(Fig. 4)
1. Press the Battery Pack Release Button
7 and slide the Battery Pack 6 from the
housing.
2. Press the Battery Pack Release Button 7
again and slide the Battery Pack 6 com-
pletely out of tool housing.
1605A002J3 GDR18V-1950C 202404.indd 13
page heading
Assembly
Disconnect battery pack from tool before making any assembly, adjust-
ments or changing accessories. Such preventive safety measures reduce
Use only Bosch or AMP-
Share batteries recom-
Ensure the switch is in
the off position before in-
Fig. 3
6
Fig. 4
7
6
13
4/15/24 8:48 AM
Publicité
