Publicité
BTL KKJJ00- _ _ _ _ -C05A _ _ _ 0-000S32
Magnetostrictive Linear Position Sensor – Rod Style
4
Product description
40-1
1)
34
6
25
Mounting surface
20.5
1)
Unusable area
Not included in scope of delivery
2)
Fig. 4-1:
Dimensions, design and function
4.1
Construction
Electrical connection: The electrical connection is made
via a connector (see Type code on page 22).
Housing: Housing containing the processing electronics.
Fastening: For secure fastening, tighten the BTL at all
6 mounting holes using cylinder screws (ISO 4762,
M6×16 - A2-70). All screws must be tightened to 3.5 Nm.
There is an additional thread at the end of the rod to
support large measuring lengths.
Position Magnet: Defines the position to be measured on
the waveguide. Position magnets are available in various
models and must be ordered separately (see Accessories
on page 21).
Measuring length: Defines the travel/length range
available. Sensors with measuring lengths from 25 mm to
4000 mm are available.
8
english
Measuring length
Actuator
2)
1)
60
Thread
M4x4.5
6 holes to fasten
the BTL
Ø 79
Ø 64
Ø 11
Ø 6.4
Publicité
