Publicité
Inlet Chute
M8 Nyloc Nut & Washer
M8x25 Screw & Washer
16mm Washer
Axle
Knob & Spring
Washer
Coach Bolts
536672.A.0 - Masport European Chipper Owner's Manual
Fig.1
Outlet Chute
M8x20 screw
Spring Washer Washer
8x32mm
Nut 10mm
Spring washer
10mm washer
Rubber Feet
Fig.2
Flap
Outlet Chute
Operating Instructions
1.
To move the unit, place a foot behind a wheel and tilt the unit
backwards until it passes its balance point.
Warning
Never move the unit while the engine is running.
2.
When crossing rough terrain or sloping areas, hold the handle
firmly at each side with both hands (to prevent tipping). In some
instances, it may be easier to tow the unit behind you.
3.
For transport by means of a vehicle the chipper may be
transported as a single unit or with the inlet & outlet chute
removed. It must be tied in an upright position using the tie-
down slots on the machine.
Note: If transporting with the inlet chute removed, Lock the
cutting disc using the M12 bolt & nut.
Fig.1
5
Publicité
