Publicité
TROUBLESHOOTING
Specific Failures & Solutions
Failure
Problem
The LED does
No power supplied.
not come on
when unit is
plugged in.
Some buttons
The display board is
can't work, or
damaged.
the LED display
is not normal.
The Cooking
High temperature of the
Mode Indicator
hob.
comes on, but
heating does not
There is something
start.
wrong with the fan.
Heating stops
Cooker has overheated. Unit is overheated. Wait for
suddenly during
operation and
on the display
flashes the pan
detection symbol
.
In case of other problems, please contact the service department.
Solution A
Check to see if plug is secured
tightly in outlet and that outlet is
working.
Replace the display board.
Ambient temperature may be too
high. Air Intake or Air Vent may be
blocked.
Check whether the fan runs
smoothly.
temperature to return to normal.
Push "ON/OFF" button to restart
unit.
Solution B
Reset the
device
by briefly
disconnecting
the electrical
connection.
If this does
not help,
please contact
the service
department.
EN 17
Publicité
