Publicité
OPERATION
Please read the chapter 'Before first use' very carefully before you start cooking.
This prevents incorrect use of the hob.
Switching on and power setting
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
1. Place a pan in the middle of a cooking zone.
2. Touch the on/off key until you hear an audio signal.
On all cooking zone displays a '-' appears.
▷
3. Use the slide control of the relevant cooking zone to set the desired setting.
The cooking zone starts automatically at the level that has been set.
▷
Set a higher or lower power using the slide control.
▷
The hob switches off if no setting is made or a function is selected within 1 minute.
Boost function
You can use the boost function to cook for max. 5 minutes at the highest cooking level.
1. Touch the boost key of the desired cooking zone to select the boost function.
An animation appears on the display ('--' move in the display).
▷
After 5 minutes, the power is reduced to the original setting. If the original setting
▷
equals 0, the power is reduced to setting 9.
Touch the slide control to stop the boost function prematurely.
When using the boost function, the front/rear cooking zone can be set to a maximum of
level 8.
Finish cooking
1. Set the power level to '0' to switch off a cooking zone.
After 3 seconds the display will show '-'.
▷
2. Switch off the induction hob by touching the on/off key until you hear an audio signal.
Symbol H (hot) or h (less hot) will appear in the display of the cooking zone which
is too hot to touch. The symbol disappears when the surface has cooled down to a
EN 10
Publicité
