an Elcometer company
Do not use the hoses to move the equipment by dragging it. Keep the hoses away from moving
parts and heated surfaces. Do not place them in contact with products that may affect them and
do not expose them to temperatures greater than 65
Insofar as possible, keep the container of the product to be transferred fixed and inserted into it,
the product return tubing (probe).
The unit has been designed for a long service life and can be used with most of the usual
products on the market. Its use with highly aggressive products will quickly increase the need
for maintenance and spare parts. If you need to apply special products, please contact SAGOLA
S.A.U.
If the equipment is going to remain for a long time running empty, disconnect it from the general
air network.
SAGOLA recommends the installation of some sort of SAGOLA air
treatment equipment in the general compressed air network, in
order to optimise the operation of the equipment.
07. Description of the equipment
The TB 270 is a fluid supply piston pump with ratio of 1:1. For transferring low viscosity fluids.
Designed for coupling directly to 50 and 200 L barrels. Low air consumption, does not require
any kind of specific installation. Eliminates risk of explosion when transferring inflammable
products.
The TB 270 equipment can be used to apply conveniently diluted products used widely in the
Construction, Automotive, Timber, Plastics Industry, etc.
Can transfer a wide variety of products:
- Lacquers.
- Paints.
- Solvents.
- Dyes.
- Lubricants.
- Glues and adhesives.
- Water-based products.
- Acids.
- All kinds of low and medium viscosity products and corrosive products.
The unit can be supplied in the following versions:
TB 270 ALUMINIO Version short and long
TB 270 INOX Version short and long
EN
26
o
o
C or less than –20
C.
short
long
www.sagola.com