Publicité
Les langues disponibles
Les langues disponibles
Installation of left/right upright tube cover
1-Tighten all the bolts.
2-Install left cover (24) to the left side of motor
upper cover (23) by three pcs of cross pan
head tapping screw ST4.2X12 (A18) , then
tighten.
3-Install right cover (25) to the right side of
motor upper cover (23) by three pcs of cross
pan head tapping screw ST4.2*12 (A18), then
tighten. ( see Figure 6)
Publicité
