Publicité
14. Fit the control shaft in the correct position
by pushing it upwards.
Connect the electricity.
15. Insert the grease filter.
For locking, rotate the 3 fixing pins by
90°.
16. Apply the aesthetic tabs (press-on) to
cover the hood fixing rib points.
17. Insert the cover between the support
cables, making sure they enter the
special slots on the cover.
Important! Leave enough cable so that it
passes easily through the slot obtained in
the cover.
Secure the cover with 3 grub screws
already screwed on the support bracket.
Note: The 3 fixing screws secure the
cover by virtue of the friction they exert on
the cover itself, and therefore must not be
completely tightened.
14
Publicité
