Publicité
6. Fix the lighting unit to the hood with 3
screws and crescent-shaped washers.
Note: The inside rim of the lighting unit
has chamfers which must match the fixing
places.
7. Apply the aesthetic covers.
Fix the aesthetic covers with 12 knobs
and 12 nylon bushings (4 per each
cover).
Repeat the operation for all the aesthetic
covers to be installed.
ATTENTION! Pay particular attention to the
position of the excess cable; the non-
observance of this direction might cause
serious damage to the appliance and/or
electrical shocks to the user or the installer.
8. Fix the hood to the hooking brackets and
secure with 1 screw for each bracket
(COMPULSORY FIXING).
9. Adjust the position of the hood by means
of the adjustment screws.
12
Publicité
