Publicité
6.2 switch
Toggle switch to select working mode
The power switch is used to control the working status of the camera.
OFF：
The camera is completely turned off, only in this mode you can remove the
memory card or replace the battery
SETUP：
1. In this mode, the camera screen is on, and you can manually record videos or
take photos, or you can view the recorded files or change the setting options
according to your needs.
2. When the camera is in setup mode, the PIR (Passive Infrared) sensor is on.
When they are triggered, the PIR lights flash. However, in this mode, the
camera will not take pictures or record videos when the PIR sensor is triggered.
ON:
1. When the camera switches from "SETUP" mode to "ON" mode, it will enter a
low-power standby state, the screen display will be turned off, and button
operations will be disabled.
2. The camera will only react to the PIR sensor. When the PIR sensor is triggered,
the camera will turn on and take photos or record videos, then return to
standby.
Notice:
Before a camera can be set up for surveillance purposes, it must be set up for that
purpose. A setup mode is provided for this purpose. In this mode, in addition to
changing settings.
7
Publicité
