Publicité
4. Preparation before use
Understanding the structure of the camera will help you use this product more
skillfully.
Notice:
It supports a maximum of 128GB SD card, which needs to use Class10 or higher
reading and writing speed level. Please format the SD card to FAT32 format on the
PC before first use, and then format it after inserting it into the camera.
1. If the camera's built-in lithium battery is exhausted, please use the 5V 1A/2A
Type-C adapter to charge. When using a Type-C charging camera, the red
indicator light at the Type-C interface will light up. Charging takes about 4-8
hours. When the camera is fully charged, the red indicator light will disappear.
2. If it needs to be placed in the wild for a long time, it is recommended to install
4 sections of LR6 (AA) No. 5 alkaline as backup. Do not mix the old and new
ones. Use AA alkaline batteries mixed.
Press right to open the
battery compartment
Notice:
Shooting will stop when the battery power is low.
Install 4 batteries
4
Publicité
