Publicité
Mode setting
Shot interval
time-lapse
shooting
timer
date/time
time watermark
format
reset
screen protector
Automatic
shut-down
economic model
beep
Photo + video (photo first, then video composite mode)
In the automatic PIR sensor shooting mode, set the
shooting interval. During the interval, the product will
no longer work. Users can set it from 5 seconds to 30
minutes as needed. The system default is 5 seconds.
Timing photography settings can be used for long-term
observation and recording of fixed scenes. Valid in PIR
auto-sensing shooting mode (ON).
Note: In this mode, the PIR auto-sensing function is
disabled.
In the automatic PIR sensor detection shooting mode,
the product can be set to work within a predetermined
time period and sleep during other time periods.
System time setting needs to be reset after a long power
outage.
Watermark function on videos or photos.
The machine will format the micro SD card inside the
machine and the files in the card will be deleted.
Restore factory settings to restore all settings of the
machine to factory settings.
This setting selects the time to automatically turn off the
display if there is no operation.
This setting is for the preview test (SETUP) mode. When
the product is inactive for a certain period of time, the
machine will automatically shut down.
Used to set the brightness of the infrared fill light.
Customers can set the machine according to their needs.
When set to "Off", there will be no beep when
performing "power on/off", "photography", and other
"key press" operations.
9
Publicité
