Publicité
EN
8.4
Maintenance schedule
/i
Battery pack
Light
Blades
Snap ring of hinge pin
Centre bolt
Hinge pins
Accessories and lock pins
Carrying handle
Deadman's handle
On-tool charge cable
1. The equipment must be thoroughly inspected, checked, set and tested. We recommend to
have this extensive maintenance performed by the Holmatro dealer (see also section 1.7).
8.5
Maintenance activities
8.5.1
General
•
After every use:
1. Check the battery pack for damage and function.
2. If the battery pack is damaged or does not function correctly, replace the damaged battery pack.
3. Check the operation of the unit.
4. Check the unit for damage and leaks. If the unit doesn't work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.5.2
Carrying handle
•
Check the carrying handle for damage. Replace a damaged carrying handle.
8.5.3
Deadman's handle
•
Check whether the deadman's handle returns to the neutral position.
•
Check the operation of the deadman's handle. Have the Holmatro dealer repair the deadman's
handle if it does not function properly.
8.5.4
Blades
See Fig. 7.
54
Check
Recharge
Check
Check, clean, lubricate
Check
Lubricate
Lubricate
Check
Lubricate
Check
Check
Check
916.400.139_002
Time interval
x
x
x
x
x
x
x
x
x
x
x
x
x
x
PCT50
Publicité
