Télécharger Imprimer la page

Holmatro PCT50 Mode D'emploi page 43

Masquer les pouces Voir aussi pour PCT50:

Publicité

/i
Color Condition
Color: green
The temperature is ok
Color: red
The battery is almost too hot.
Charge > 40°C (104°F), discharge > 65°C (149°F)
Color: red, flashing
The battery is too hot.
Charge > 45°C (113°F), discharge > 70°C (158°F)
Color: blue
The battery is almost too cold.
Charge < 5°C (41°F), discharge < -15°C (5°F)
Color: blue, flashing
The battery is too cold.
Charge < 0°C (32°F), discharge < -20C (-4°F)
3.7
Technical specifications battery pack
/i
Description
voltage
capacity
energy
battery type
protection rate
weight, ready for use
temperature range
3.8
Safety features of the battery pack
The battery pack is protected against:
Short-circuit
Deep discharge
Over- and under-voltage (of the battery pack and the individual cells)
Over-current during charging and discharging
Overcharging
Over temperature (of individual cells and electronics)
Charging and discharging outside the allowed temperature range
3.9
Mains Connector
Refer to Fig. 4.
The mains connector is a special power pack. It can replace the battery of a power tool by the mains
supply. The parameters of the mains connector are almost equivalent to the regular battery. It has the
on/off switch and the LED indication shows the status of the mains connector.
The mains connector is protected against:
PCT50
Unit
PBPA287
VDC
28
Ah
Wh
176
Li-Ion
-
IP67
kg
1.5
lb
3.3
°C
-20 + 55
°F
-4 + 131
916.400.139_002
Tool
OK
OK
stopped
OK
stopped
7
Action / Solution
Use the battery pack
Can be charged or used.
Be prepared to cool or
replace the battery.
Cool or replace the
battery.
Can be charged or used.
The battery will warm up
itself.
Warm up or replace the
battery.
EN
43

Publicité

loading