Publicité
EN
32
TROUBLESHOOTING
Problem
"Add water" indicator
light always on
Ice cubes are too thin
Ice too thick
The ice cycle is normal,
but no ice is produced
The machine does not
produce cold water
The machine does not
produce ice
Possible Cause
Lack of water in the
water tank
The level switch float in
the cold water tank is
stuck and will not rise.
Ambient temperature
too high
Poor ventilation
Ambient temperature
too low
The ambient tempera-
ture is too high or the
water temperature in the
water tank is too high.
Refrigerant leak
Refrigerant pipe blocked
Lack of water in the
water tank
The ice making time is
too short and there is
no ice or less ice in the
fridge
Solution
Manually refill water
tank.
Clean the cold water
tank and level switch.
Move the machine to a
cooler location
The distance between
the back, left and right
sides of the machine and
the obstacle is greater
than 15cm
Move the machine to a
warmer place
Move to a location where
the ambient tempera-
ture is less than 32°C
and add cold water
Requires professional
repair
Requires professional
repair
Check the water pressu-
re of the inlet channel
and the smoothness of
the channel
One ice-making cycle
takes approximately 9
minutes. A few more ice-
making cycles will make
it normal.
Publicité
