Télécharger Imprimer la page

Klarstein ARCTIC BLEND Mode D'emploi page 32

Publicité

EN
30
CLEANING AND MAINTENANCE
Unpack the unit.
Use a neutral detergent, warm water and a soft cloth to scrub and clean the
water tank, crushed ice tray, crushed ice tray cover and silicone hose.
The machine cabinet can be cleaned with the machine switched off. It is best to
wipe with a dry cloth.
You can also add water to make ice for 1–2 cycles, then throw away all ice
cubes and water.
After cleaning, replace the drain plug at the bottom of the machine.
If the machine has not been used for a long time, drain the water in the water
tank.
Note: When the machine has been used for a long time, please clean the inside of
the machine according to the following instructions.
Opening the rear panel
1.
Disconnect the power plug, place the machine on a level surface, press the
two "Rear panel buckles" on the back of the machine and open the rear panel
downwards.
Pull out the ② "Silicone Drain Tube" first. Pull out the ① "Ice and water box".
2.
3.
Use cleaning tools to clean the Ice Maker Water Box and Silicone Hose.
Note: After cleaning, all parts must be returned to their original positions.
Rear wall plate
buckle

Publicité

loading

Ce manuel est également adapté pour:

10046191