Publicité
5. Dispense ice cubes/ ice water
•
Gently press the Pour Ice button, the impeller in the ice bin will begin to rotate
and the ice cubes will begin to fall from the Pour Ice position. Press the Pour
Ice button again and the impeller will stop rotating, ending the ice dispensing
process. For optimal ice dispensing, make sure there are enough ice cubes in
the ice tray and a cup ready to be filled with ice cubes.
•
Gently press the "Pour Water" button, water will flow from the "Pour Water"
position. Press the Pour Water button again to stop the ice water coming out.
Note: If you press the "Pour Water" button without first operating the
"ICE CUBES" or "ICE WATER" buttons, the water that comes out will not be ice
water. The "Pour Water" function is automatically deactivated if it is used for
more than 10 seconds.
Important information
•
Check the cleanliness of the water tank and ice bin. Please clean and change
the water regularly.
•
The temperature of the added water directly affects the ice production. The
lower the water temperature, the greater the ice production.
•
The lower the ambient temperature where the machine is placed, the greater
the ice production.
•
The quality of the water used will affect the life of the machine's water pump.
It is best to use softened water, pure water or drinking distilled water. Some
abnormal noises during the operation of the water pump are caused by
impurities in the water. This is a normal phenomenon and does not affect the
use of the machine.
EN
29
Publicité
