Publicité
EN
26
INSTRUCTIONS FOR USE
1.
Remove all internal and external packaging to check for missing hoses and tap
adapters. If any of the accessories are missing, contact the customer service
department.
2.
The machine's power socket must be securely grounded and supplied by a
separate plug.
3.
Place the machine in a well ventilated place with a relatively low ambient
temperature and position it horizontally. The distance between the air outlet
and the obstacle must be more than 15 cm, and the distance between the two
sides and the obstacle must be not less than 10 cm.
4.
If the machine has been turned upside down during transport and handling,
it is recommended to let the machine stand for more than 2 hours before
turning it on.
5.
It is strongly recommended that the entire machine is thoroughly cleaned
before use. Please follow the cleaning instructions in "Cleaning and
Maintenance" to clean the machine.
WARNING
When adding water to refill the machine, please add potable water,
preferably pure water from a barrel or bottle. The quality of the
water directly affects the clarity of the ice cubes and the life of the
machine.
1. Add water
Automatically adding water(External water source)
Step 1: Connect one side (20mm) of the adapter to the tap.
Step 2: Connect one end of the white PE hose to the other end (Ø 6.5 mm) of the
adapter.
Step 3: Connect the other end of the white PE hose to the Tap Water Inlet.
Publicité
