Publicité
How To Fix
The wall you select should be strong and solid
enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a
concrete wall, use anchor bolts.
• Mount the installation plate horizontally by
aligning the centerline using a level.
2. Measure the wall and mark the centerline. It
is also important to use caution concerning
the location of the installation plate-routing
of the wiring to power outlets is through the
walls typically. Drilling the hole through the
wall for piping connections must be done
safely.
<9/12 kBtu/h class>
Installation Plate
Chassis
Hook
Type "A"
90(3 17/32)
Ø70mm
Left rear piping
<18 kBtu/h class>
Installation Plate
Chassis
Hook
Type "A"
Ø70mm
133mm
Left rear piping
Installation Manual 15
Installation
70(2 3/4)
Ø70mm
Right rear piping
Ø70mm
100mm
Right rear piping
Publicité
