Publicité
SET UP AND OPERATION
The first application should be
carried out by a qualifi ed healthcare
professional to understand the correct
fi tti ng and how to put the device on
properly. Subsequently, the product
should be put on the pati ent in the
same way by the user or a family
member or a friend.
If the back panel is not needed:
1. Remove the back panel.
2. Unfasten the two tabs 1D & 1G of
hypogastric strap from their velcro
fastenings.
3. Positi on the seam 2 of the tabs over
the belly butt on.
4. Adjust and att ach the velcro on the
side of the belt to your waist 3, making
sure to keep the seam 2 of the two
tabs at the belly butt on.
5. Then att ach the 2 tabs 1D & 1G
of hypogastric strap to the desired
ti ghtness, beginning with the left tab.
If the back panel is required:
6. Follow steps 2 and 3.
7. Make sure that the back panel is
centered on the spine, so that it is in
line with the seam 2.
8. Follow steps 4 and 5.
ABDOMINAL BAND BELT
CARE INSTRUCTION, MAINTENANCE
AND DISPOSAL
Hand wash in warm soapy water
(maximum 40 ° C), Rinse thoroughly.
Wring out gently; Do not bleach; Dry
fl at, do not tumble dry; Do not iron;
Do not dry clean.
The device and packaging must
be disposed of in accordance
with respective local or national
environmental regulati ons.
EN
Publicité
