General Characteristics - Cembre B1350-UC Notice D'utilisation Et Entretien

1. GENERAL CHARACTERISTICS

Application range
Rated crimping force
Minimum crimping force
Minimum operating pressure
Dimensions (ref. to Fig. 6)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
ASC30-36
Input
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
Vibration
(2)
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
L
= weighted continuous acoustic pressure level equivalent.
pA
L
= maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L
= acoustic power level emitted by the machine.
WA
(2)
(Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1st Standards, and under operating conditions much more severe than those normally found.
7
B1350-UC
suitable for installing electrical compression connectors
for conductors up to 400 mm
kN (US sh.ton)
kN (US sh. ton)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from
a rapid advancing speed of the ram to a slower, more
V / Ah / Wh
kg (lbs)
type EU
27044000
V / Hz
W
dB (A)
dB (C)
dB (A)
m/s
2
B1350-UCE B1350-UCT
2 (800 MCM) and Aluminium
conductors up to 300 mm
132 (14.84)
125,2 (14.07)
692 (10037)
351x369x83 (13.8x14.5x3.3)
5,9 (13)
18
-15 to +50 (+5 to +122)
AGIP ARNICA 32 or equivalents
powerful crimping speed
maximum pressure valve
18 / 4.0 / 72
CB1840L (Li-Ion)
0,66 (1.45)
UK
27045000 27047000
220 - 240 / 50 - 60
85
73
94.5
79
0.575 max.
B1350-UCA
2 (600 MCM)
AUS/NZ USA/CAN
27046000
115 / 60