Hilti TE 2 Mode D'emploi page 21

Drilling diameter
range in wood
(solid)
Drilling diameter
range in metal
(solid-head drill
bit)
Maximum length of the
depth gauge
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration,
for example: maintaining the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in
the reproduction of the declaration of conformity
Noise information
Sound power level (L
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for hammer drilling in concrete
(a )
h, HD
Vibration emission value for drilling in metal (a
Uncertainty (total vibration)
Operation
Fitting the side handle
CAUTION
Risk of injury! The depth gauge, if fitted but not used, might hinder the operator.
▶
Remove the depth gauge from the tool.
CAUTION
Risk of injury! Loss of control over the product.
▶
Check that the side handle is fitted correctly and tightened securely. Check that the
clamping band is engaged in the groove in the product.
*2059547*
TE 2
4 mm ... 20 mm
•/•
3 mm ... 13 mm
•/•
180 mm
)
WA
)
pA
2059547
TE 2-S
4 mm ... 20 mm
•/•
3 mm ... 13 mm
•/•
180 mm
157.
)
WA
)
pA
)
h, D
TE 2­M
10 mm ... 20 mm
4 mm ... 10 mm
8 mm ... 13 mm
3 mm ... 8 mm
180 mm
102 dB(A)
3 dB(A)
94 dB(A)
3 dB(A)
12.1 m/s²
2.8 m/s²
1.5 m/s²
2
15