Publicité
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
2 x Leg, outer (1)
2 x Leg, inner (2)
1 x Crossbar,
incl. 4 x cross bolt with lock nut (3)
3 x Hanger (4)
4 x Screw (5)
1 x Allen key (6)
1 x Instructions for use
Technical data
Date of manufacture (month/year):
07/2021
Delta-Sport Handelskontor GmbH
hereby declares that this product
meets the following basic require-
ments, as well as other important regulations:
2009/48/EC – Toy Safety Directive
UK Conformity Assessed
Use according to guidelines
This product is a toy for private use and for
children aged 0 years and above.
10
GB
Safety instructions
• Warning. Neither the packaging/mounting
materials nor the 'SUPER DRY' pouch (desic-
cant) are a constituent part of the toy and they
must be removed before the product is given
to children to play with.
• Warning. Desiccant contains calcium chloride
(CAS 10043-52-4). Keep out of reach of
children.
• Children may play with this product only
under adult supervision.
• Check the product for damage and wear be-
fore each use. The product may only be used
in good order and condition!
Assembly (fig. B)
1. Place the product on a clean and soft surface.
2. Place two legs (1) (2) one over the other.
Note: Make sure that the leg (1) with the recess
for the screw head is on the outside. The screws
will be inserted from this side so that the screw
head sits flush against the wood.
3. Hold the crossbar (3) level with the drill holes
in the legs and secure them from the outside
using the screws (5) and the Allen key (6).
Use a flat-head screwdriver to lock the nuts
of the cross bolts (not included in delivery) to
prevent any warping.
Note: Be sure to align the cross bolts correctly.
The screw is tightened by its interlocking thread
pattern.
4. Suspend the hangers (4) using the loops in
each of the recesses in the crossbar.
Note: Be sure to align the crossbar correctly.
The cross bolts with their lock nuts are on the
back.
5. Attach the other two legs in the same way
using the screws on the crossbar.
6. Stand the product flat on the ground.
Publicité
