Publicité
● On the home screen, press and hold "
same time for two seconds to enter the query interface, and
u00-u03 indicates ODUs, n00-n74 indicates IDUs, and CC
indicates the wired controller. Press "
the parameter code. Press "Swing" to enter the parameter
query page.
● Press "
" to exit the query page. The parameter query page
automatically closes if no button is pressed within the next
60 seconds.
● Press "
" or "
parameters can be queried cyclically.
● On the top of the query page, the "Timing area" displays the
check list serial number, and the "Temperature area"
displays the check list parameters.
● Check list query information is listed as follows: Information
may vary depending on unit model. Check list of parameters
applies to VRF units and mini VRF units of JR6 (including
IDUs and ODUs), inverter split of JR6 (including IDUs and
ODUs), as well as IDUs and ODUs of JR8 only.
" to query the parameters, and the
58
" and "
" at the
" and "
" to switch
V.1
Publicité
