Parameter
Parameter Name Parameter Range Default
Code
N69
Target humidity for
third-party
dehumidifiers
N70
Target humidity for
third-party
humidifiers
N71
IDU control type
N72
Minimum
temperature settings
of cooling operating
range
N73
Maximum temperature
settings of heating
operating range
N74
Anti-cold wind
temperature setting
of special IDUs
N75
IDU operating mode
setting if the IDU is
shut down remotely
Value
35%/36%/37%/
65%
.../75%
65%
35%/36%/37%/
.../75%
01/02
01
00/01/02/03/04/05/06
00
/07
00/01/02/03/04/05/06
00
/07
00/01/02/03/04
00
00/01
00
51
Remarks
Valid to JR8 FAPU.
01: Supply air temperature control
02: Room temperature control
Valid to JR8 FAPU.
Valid to JR8 FAPU.
00/01/02/03: corresponds to different values;
04: Anti-cold wind disabled
00: After the remote shutdown signal is canceled, the
IDU runs in the preset mode or based on the command
that is received during shutdown period. The preset
mode is the mode set before the remote shutdown
signal is triggered.
01: After the remote shutdown signal is canceled, the
IDU is shut down.
V.1