Publicité
Parameter
Parameter
Code
Name
C19
T1
temperature
source
selection
C20
Swing motor
direction
setting
Parameter
Range
F0/F1/F2/F3/##
00/01
40
Default
Value
Applicable model
F1(For
Floor-standing
(the setting is valid
unit : F0)
only when the
wired controller is
connected to a JR8
IDU)
F0
F1
F2
F3
## (number of the
IDU address)
00
00: Forward
01: Reverse
Remarks
Only for the JR8 FAPU, the
value of C19 parameter
cannot be set and T1 value
is fixed to F1. For other
models, the value of this
parameter can be set.
T1 temperature sensor
configured for the IDU
Follow Me T1 temperature
sensor embedded in the
wired controller
Second temperature
sensor (reserved)
Ground temperature
sensor (reserved)
T1 temperature sensor of
other IDUs in the system
(numbers of the IDU
addresses: 00 to 63. If the
wired controller is
connected to multiple
IDUs, the number of the
main IDU address is
displayed)
(The setting is valid only
when the wired controller
is connected to a common
JR8 IDU.)
V.1
Publicité
