Télécharger Imprimer la page

MACAP M2 Serie Instructions Originales page 33

Masquer les pouces Voir aussi pour M2 Serie:

Publicité

scroll through the menu until the "TRIPLE DOSE" symbol
appears. Press the DOSE button to activate the ON/OFF
function and select using the "+" or "-" button. Confirm the
selection by pressing the DOSE button again.
Select the EXIT screen and press the DOSE button to exit
programming.
In the operating menu it will now be possible to choose the
triple dose if enabled.
9.7.3 ∞ (CONTINUOUS DOSING )
To enable continuous dosing, proceed as follows: enter the
programming menu, use the "+" or "-" keys to scroll throu-
gh the menu until the "INFINITY" symbol appears. Press the
DOSE button to activate the ON/OFF function and select
using the "+" or "-" button. Confirm the selection by pres-
sing the DOSE button again.
Select the EXIT screen and press the DOSE button to exit
programming.
In the operating menu it will be possible to choose conti-
nuous dosing if enabled.
The machine can work in continuous mode only for short
periods of time. To avoid overheating the motor, never run
the appliance continuously for more than one minute.
9.7.4 RELEASE
In the programming menu it is also possible to view the
software version used by the machine. This information
may be requested by the assistance service in the event
of malfunctions.
9.7.5 EXIT
To exit the programming menu, use the "+" or "-" buttons
to scroll through to "EXIT", and press the DOSE button to
return to the operating menu.
9.8 OPERATING MENU
M2 SERIES
EN
33

Publicité

loading