Publicité
Machine body
Use a damp cloth to clean the machine
body, taking care over all water-sensitive
parts, such as the dosing button and the
ON/OFF switch.
Grinding chamber
To clean the inside of the machine, remove
the metal ring lying over the toothed ring
(see figure F2) using a flat screwdriver. Now
remove the three screws which hold the
toothed ring in place (see figure F3) and
remove it. Unscrew the top grinder holder
clockwise (see figure F4) so as to expose
the grinding chamber (see figure F5).
To clean the inside of the grinding cham-
ber correctly, use a vacuum cleaner and a
brush.
6. DISPOSAL
PACKAGING DISPOSAL
After opening the packaging, check that
the appliance is intact and that no dam-
age has occurred during transport. If the
appliance has been damaged, contact the
M2 SERIES
EN
F2
F3
F4
F5
25
Publicité
