Publicité
EN
the electricity provider must be observed. Place the appliance on a
flat surface to ensure maximum stability. Before plugging the appli-
ance into the mains, make sure the ON/OFF switch is set to OFF (see
figure F1) and make sure the voltage and frequency data shown on
the technical data plate match the power supply values. The power
socket MUST be connected to the earthing system and comply with
current safety standards.
4. MAINTENANCE
Maintenance operations must be performed by qualified technical
personnel only. Maintenance operations involving the replacement
of worn components must always be carried out using genuine
spare parts.
5. CLEANING
ALWAYS UNPLUG THE APPLIANCE BEFORE PERFORMING ANY KIND
OF CLEANING OPERATIONS.
NEVER IMMERSE THE APPLIANCE IN WATER. IT IS ADVISABLE TO
AVOID USING ABRASIVE PRODUCTS WHICH COULD RUIN THE SHINY
PARTS OF THE APPLIANCE
Removable plastic parts
Take all removable parts off the machine (hopper cover, hopper,
tray, etc.) and wash them with plenty of water and neutral detergent
(never put them in the dishwasher).
24
M2 SERIES
Publicité
