Publicité
When using self-propelled mowers, please keep a
low self-propelled speed when you mow on a slope.
2.4
SERVICE/MAINTENANCE
• Check the blade and the motor (machine) mounting
bolts at frequent intervals for proper tightness.
• Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could
damage the motor drive unit or cause personal
injury.
• Keep all nuts, bolts, and screws tight in order to
ensure the equipment is in safe working condition.
• Do not wash with a hose; avoid getting water in
motor and electrical connections.
• Never remove or tamper with safety devices. Check
their proper operation regularly. Never do anything
to interfere with the intended function of a safety
device or to reduce the protection provided by a
safety device.
• Keep mower free of grass, leaves, or other debris
build up. Allow mower to cool before storing.
• Never make any adjustments or repairs with the
motor running.
• Always remove battery pack from mowers before
adjusting, cleaning, or repairing.
• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Sharpen a dull blade equally at each end to
maintain the balance.
• Keep guards in place and in working order. Mower
blades are sharp, and can cut. Wrap the blades or
wear gloves, and use extra caution when servicing.
• Clean the blade thoroughly and check its balance by
supporting it horizontally on a thin nail through its
center hole. The nail should also be in a horizontal
position. If either end of the blade rotates downward,
remove some metal from the heavy or lower end
until the blade is balanced. It is balanced when
neither end drops.
• Use identical replacement blades only.
• Maintain lawn mower with care. Keep cutting edges
sharp and clean for best and safest performance.
Follow instructions for lubricating and changing
accessories. Inspect lawn mower cord periodically
and if damaged, have it repaired by an authorized
service facility.
• If situations occur that are not covered in this
manual, use care and good judgment or contact
Customer Service for assistance.
• Never operate the mower without proper guards,
plates, or other safety protective devices in place.
English
TIP
• Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
• Tighten correctly all the fasteners and caps.
• Clean the machine with a dry cloth. Do not use
water.
The recommended ambient temperature range:
Item
Mower storage temperature
range
Mower operation temperature
range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
2.5
LAWN MOWER SAFETY WARNINGS
• Before using, always visually inspect to see that
the blade, blade bolt and the blade assembly are
not worn or damaged. Replace worn or damaged
components in sets to preserve balance. Replace
damaged or unreadable labels.
• Do not mow excessively step slopes.
• Stop the blade(s) if the machine has to be tilted
for transportation when crossing surfaces other than
grass, and when transporting the machine to and
from the area to be used.
• Switch on the motor carefully according to
instructions and with feet well away from the
blade(s).
• Do not tilt the machine when switching on the motor,
except if the machine has to be tilted for starting.
In this case, do not tilt it more than absolutely
necessary and lift only the part, which is away from
the operator.
• Do not start the machine when standing in front of
the discharge opening.
• Do not transport the machine while the power
source is running.
• Stop the machine, remove the disabling device and
battery pack. Make sure that all moving parts have
come to a complete stop
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
7
EN
Temperature
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
39°F (4°C) - 104°F
(40°C)
39°F (4°C) - 104°F
(40°C)
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
Publicité
