Publicité
7.4
INSTALL THE MULCH PLUG
1.
Remove the grass catcher.
2.
Open the rear discharge door and hold it.
3.
Hold the mulch plug by its handle and fit it in the
discharge chute.
4.
Close the rear discharge door.
7.5
SET THE CUTTING HEIGHT
The machine can be set to different cutting height.
English
1
1.
Remove the locating pin by sightly pull the rod
backward.
2.
Grab the rod and move it backward to raise the
height or move it towards to decrease the height.
3.
Align the upper and lower holes, then insert the
locating pin.
11
2
2
1
EN
Publicité
