Publicité
EN
- before checking, cleaning or working on the
machine;
- after striking a foreign object. Inspect the machine
for damage and make repairs before restarting and
operating the machine.
• Keep all nuts, bolts and screws tight to be sure the
machine is in safe working condition.
• On machines with multi blade, take care as rotating
one blade can cause other blades to rotate.
• Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
• Always allow the machine to cool down before
storing.
• When servicing the blades be aware that, even
though the power source is switched off, the blades
can still be moved.
3
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
mower. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the mower better and safer.
Sym-
Name
bol
V
Volt
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
/min
Per Minute
Alternating
Current
Direct Cur-
rent
No Load
n o
Speed
Safety Alert
Eye Protec-
tion
Explanation
Voltage
Current
Frequency (cycles per sec-
ond)
Power
Time
Revolutions, strokes, sur-
face speed, orbits etc., per
minute
Type of current
Type or a characteristic of
current
Rotational speed, at no
load
Precautions that involve
your safety.
Always wear eye protection
with side shields marked
to comply with ANSI Z87.1
when operating this equip-
ment.
English
Sym-
Name
bol
WARNING
--- Wet Con-
ditions
Read Opera-
tor's Manual
Maintain
Safety Devi-
ces
Look Behind
While Back-
ing
DANGER ---
Keep Hands
and Feet
Away
DANGER ---
Keep By-
standers
Away
DANGER ---
Thrown Deb-
ris
DANGER ---
Steep Slope
Hazard
4
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this
product.
8
Explanation
Do not expose the product
to rain or moist conditions.
To reduce the risk of in-
jury, user must read and
understand operator's man-
ual before using this prod-
uct.
Do not open or remove
safety devices while the
tool is running.
Look down and behind first
to avoid tripping when pull-
ing back.
To reduce the risk of injury,
keep hands and feet away
from rotating parts. Do not
operate unless discharge
cover or grass bag is in its
proper place. If damaged,
replace immediately.
All visitors should be kept
at a distance from work
area.
Remove objects that can
be thrown by the blade in
any direction. Wear safety
glasses.
Use extra caution on
slopes. Do not mow slopes
greater than 15 degrees.
Publicité
