Télécharger Imprimer la page

GreenWorks Commercial 82LM30S Manuel D'opérateur page 15

Publicité

• Monitor the holes, ruts, rocks, and other hidden
objects that can cause you to fall. Remove all
obstacles such as rocks and tree limbs.
• Make sure that your footing is stable. If you are out
of balance, release the start handle immediately.
• Do not mow near drop-offs, ditches, or
embankments.
9.9
OPERATION TIPS
• Do not try to override the operation of the start
button or start handles.
• Do not tilt the machine when you start it.
• Do not put hands or feet near or below the turning
parts.
• Keep the discharge chute clean.
• Do not cut wet grass.
• Higher blade height is necessary for new or thick
grass.
• Clean the bottom of the mower deck after each
use. Remove grass clippings, leaves, dirt, and other
debris.
10
MAINTENANCE
WARNING
Remove the safety key and battery pack from the
machine before maintenance.
WARNING
Keep the motor and battery pack free from grass,
leaves or too much grease.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
CAUTION
Do not use strong solvents or detergents on the
plastic housing or components.
10.1
GENERAL MAINTENANCE
• Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
• Tighten correctly all the fasteners and caps.
English
• Clean the machine with a dry cloth. Do not use
water.
10.2
CLEAN THE AIR FILTER
Clean the air filter after using the machine for 20
hours.
1.
Stop the machine.
2.
Remove battery packs.
3.
Clean the area around the air filter with a damp
cloth or soft brush.
4.
Turn the bolt counterclockwise until the air filter
can be removed.
5.
Remove the air filter by lifting it up.
6.
Rinse away coarse dirt from the outside of the
air filter under running water. Never spray the air
filter with a pressure washer.
7.
If the air filter is damaged, replace it.
8.
Allow the air filter to air dry.
9.
After the air filter has dried thoroughly, push it into
place by hand.
10. Tighten the bolt.
15
NOTE
EN

Publicité

loading

Ce manuel est également adapté pour:

Lmb40005