Publicité
EN
7.6
INSTALL THE BATTERY PACK
21
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and follow the instructions in the
battery and charger manual.
1.
Open the battery door.
2.
Align the ribs on the battery pack with the
grooves in the battery compartment.
3.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
4.
When you hear a click, the battery pack is
installed.
5.
Close the battery door.
6.
After inserting the battery pack, the battery
indicator will turn grey to green.
You can also insert one or two battery packs.
When the battery pack is lower than 16%, the battery
indicator will turn red.
WARNING
NOTE
NOTE
English
When the battery pack is over temperature,
temperature indicator will ture red and glitter .
7.7
REMOVE THE BATTERY PACK
1.
Open the battery door.
2.
Push and hold the battery release button (21).
3.
Remove the battery pack from the machine.
8
APP OPERATION
Find the serial number, pairing code and QR code in
the quick guide manual.
8.1
REGISTRATION AND LOGIN
1.
Press the power switch once and wait for the
display to respond.
2.
Visit the website of Fleet Management:
fleet.greenworkscommercial.com.
3.
Create an account and then log in.
4.
Invite other users in your organization.
5.
Scan the QR code, download the app and log in.
6.
Add a device. Find the serial number, pairing
code and QR code in the vehicle matching
label on this manual. Scan QR code or type in
manually.
QR code
9
OPERATION
Wear eye protection during operation.
12
NOTE
Serial number
Pairing code
WARNING
Publicité
