Publicité
EN
10.3
REPLACE THE BLADE
Use only approved replacement blades.
Wear heavy gloves or wind cloth around the blade
when you touch the blade.
1.
Stop the machine.
2.
Make sure that the blade is fully stopped.
3.
Remove battery packs.
4.
Turn the machine to its side.
5.
Insert an 8 mm mandril into the holes on the
blade and blade fixed seat.
6.
Remove the mounting screw and spacer with a
wrench or socket.
7.
Remove the blade.
8.
Remove the blade fixed seat.
9.
Install the blade fixed seat.
10. Install the new blade.
11. Put in the spacer and tighten the mounting screw.
Recommended tightening torque: 24 - 27 ft.lbs.
33 - 37 N.m.
10.4
STORE THE MACHINE
• Remove the battery pack(s).
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose
or damaged parts. If it is necessary, follow these
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
WARNING
WARNING
English
• Make sure that children cannot come near the
machine.
10.5
VERTICAL STORAGE
1.
Remove the grass catcher.
2.
Remove the batteries.
3.
Line up the handle knobs in the top hole on the
brackets.
4.
Push the bolt into the slot and rotate clockwise to
fasten it.
5.
Do the same operation on the other side.
16
1
2
Publicité
